CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
| SAMPLE NAME | TEST NAME | TEST METHOD | TEST FEE (PhP) | SAMPLE REQUIREMENT |
| FUELS AND PETROLEUM PRODUCTS | ||||
| Liquid Fuels/ Lubricants | API Gravity/Specific Gravity/Density | ASTM D4052/ASTM D1298 | 700.00 | 500mL |
| Ash, straight | ASTM D 482 | 670.00 | 100mL | |
| Ash, sulfated | ASTM D 874 | 840.00 | 100mL | |
| Color | ASTM D1500 | 360.00 | 100mL | |
| Copper Corrosion test | ASTM D130 | 700.00 | 100mL | |
| Flashpoint | ||||
| Cleveland Open Cup (COC) | ASTM D 92 | 700.00 | 500mL | |
| Penky Martens Closed Cup (PMCC) | ASTM D 93 | 700.00 | 500mL | |
| Tag Closed Tester (TCT) | ASTM D 56 | 700.00 | 500mL | |
| Kinematic viscosity | ASTM D 445 | 800.00 | 200mL | |
| Total Acid Number | ASTM D 974 | 520.00 | 200mL | |
| Viscosity Index | ASTM D 2270 | 1,320.00 | 200mL | |
| Water & sediments | ASTM D 1796/ ASTM D2709 | 840.00 | 1L | |
| Water content | ASTM D 95 | 840.00 | 1L | |
| Compatibility test | ASTM D 4740 | 1,300.00 | 500mL | |
| Sulfur | Combustion | 2,000.00 1st spl, 900.00 next | 100mL | |
| CHN | Combustion | 3,100.00 1st spl, 1,500.00 next | 100mL | |
| Heating Value | ASTM D240 | 1,500.00 | 100mL | |
| Pour Point | ASTM D97 | 1,500.00 | 200mL | |
| Solid Fuels (charcoal, wood, biomass) | Proximate Analysis | ASTM D 1762 | 1,990.00 | 100g finely ground |
| Ash | ASTM D 1762 | 840.00 | 100g finely ground | |
| Moisture | ASTM D 1762 | 450.00 | 100g finely ground | |
| Volatile Combustible Matter | ASTM D 1762 | 700.00 | 100g finely ground | |
| Fixed Carbon (by difference) | ASTM D 1762 | 1,990.00 | 100g finely ground | |
| Heating value | ASTM D 3286 | 1,500.00 | 100g finely ground | |
| Sulfur | ASTM D 4239 | 2,000.00 1st spl, 900.00 next | 100g finely ground | |
| Ultimate Analysis | ASTM D 5373 | 3,100.00 1st spl, 1,500.00 next | 100g finely ground | |
| Anthracite Coals | Acid solubility | ANSI/AWWA B100-96 | 1,500.00 | 1000g granules |
| Hardness, Mohs' scale | 300.00 | 100g blocks | ||
| Grease | Dropping Point | ASTM D 566 | 600.00 | 100g |
| Penetration Worked | ASTM D 217 | 650.00 | 500g | |
| Brake Fluid | Dry ERBP | PNS 239 | 480.00 | 1L |
| Loss on Evaporation | PNS 239 | 2,200.00 | 1L | |
| pH | PNS 239 | 400.00 | 1L | |
| Specific Gravity | ASTM D 1298 | 700.00 | 1L | |
| Kinematic viscosity @100OC | ASTM D 445 | 800.00 | 1L | |
| Waxes | Drop Melting Point | ASTM D 127 | 720.00 | 100g |
| Penetration, Needle | ASTM D 1321 | 720.00 | 200g | |
| Asphalt | Penetration, Needle | ASTM D 5 | 720.00 | 200g |
| Softening Point | ASTM D 36 | 720.00 | 50g | |
| PLANTS AND PHARMACEUTICAL PRODUCTS | ||||
| Proximate Composition of Plant & Plant Products and Herbal Food Supplements | Acid insoluble ash | USP 23, [561] | 1,080.00 | 20g |
| Crude fat | AOAC 920.39 | 960.00 | 20g | |
| Crude Fiber | USP 23, [561] | 1,380.00 | 20g | |
| Crude Protein | AOAC 955.04 | 1,120.00 | 20g | |
| Essential Oil content | USP 23, [561] | 1,080.00 | 500g per set up | |
| Fixed Oil Content | USP 23, [401] | 840.00 | 500g | |
| Moisture | USP 23, [921] | 600.00 | 20g | |
| Total Ash | USP 23, [561] | 720.00 | 20g | |
| Plant Components | Phytochemical (alkloids, flavonoids, glycosides saponins, sterols, tannins, triterpenes | BTD Manual Qualitative | 650.00 | 300g |
| Alkaloids | TLC | 1,200.00 | 300g | |
| Flavonoids | TLC | 1,200.00 | 300g | |
| Glycosides | TLC | 1,200.00 | 300g | |
| Hydrogen Cyanide | BTD Manual Qualitative | 600.00 | 300g | |
| Sterols | TLC | 1,200.00 | 300g | |
| Sugar (Glucose, Fructose, Sucrose) | HPLC | 2,500.00 any 1st analyte; add'l analyte 600.00 each | 100-150g dried or fresh spl | |
| Triterpenes | TLC | 1,200.00 | 5-10g extract, 50g dried part | |
| Plant Oils (Essential & Fixed Oil) Plant Extracts | Iodine value | USP [401] | 600.00 | 10g |
| Refractive Index | USP [831] | 400.00 | 5mL | |
| Saponification Value | USP [401] | 800.00 | 20g | |
| Acid Value | Titration | 600.00 | 100mL | |
| Specific Gravity | USP [841] | 500.00 | 100mL | |
| Total Essential Oil Content | AOAC 932.11 | 1,080.00 | 300mL | |
| Total Fixed Oil Content | USP [401] | 840.00 | 250g | |
| Viscosity (Brookfield) | ASTM D 2556 | 840.00 | 500mL | |
| Scavenging activity of plant extracts | Spectrophotometer | 3,960.00 | 200g | |
| Antioxidant activity of plant extracts | Spectrophotometer | 1,160.00 | 200g | |
| Carvacrol | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Citral | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Citronellal | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Citronellol | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Eucalyptol/Cineole | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Eugenol | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Geraniol | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Limonene | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Linalool | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Myrcene | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| ą-Pinene | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| ß-Pinene | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Terpineol | GC | 1,800.00 any 1st analyte, add'l analyte 600.00 each | 5mL | |
| Alkaloids | Caffeine | HPLC | 2,800.00 | 100g |
| Tannins | Catechol | TLC | 1,200.00 | 100g |
| Pyrogallol | TLC | 1,200.00 | 100g | |
| Liquid Nutritional Supplement | Calcium | AOAC 929.07 | 1,920.00 | 1L |
| Phosphorous | AOAC 930.35 | 1,440.00 | 500mL | |
| Sodium | AOAC 966.16 | 1,920.00 | 1L | |
| Plant Products & Herbal Supplements | ß-Carotene | HPLC | 4,000.00 | 100g |
| Vitamin A | HPLC | 3,750.00 | 100g | |
| Vitamin B1 | HPLC | 3,500.00 | 100g | |
| Vitamin B2 | HPLC | 3,500.00 | 100g | |
| Vitamin B6 | HPLC | 3,500.00 | 100g | |
| Vitamin E | HPLC | 3,600.00 | 100g | |
| Topical Preparations, Liniments, Ointments | Camphor | GC | 1,800.00 any 1st analyte, 600.00 per add'l analyte | 60-100mL |
| Menthol | GC | 1,800.00 any 1st analyte, 600.00 per add'l analyte | 60-100mL | |
| Eucalyptol/Cineole | GC | 1,800.00 any 1st analyte, 600.00 per add'l analyte | 60-100mL | |
| Methyl Salicylate | GC | 1,800.00 any 1st analyte, 600.00 per add'l analyte | 60-100mL | |
| Medicated Cosmetic Soaps | Camphor | GC | 1,800.00 | 60-100mL |
| Menthol | GC | 1,800.00 | 60-100mL | |
| Medicated Cosmetic Liquid Preparations | Retinoic Acid (Tretinoin) | HPLC | 3,750.00 | 4 bots in orig. pack |
| Ethanol / 2-Propanol | GC | 1,800.00 any 1st analyte, 600.00 per add'l analyte | 250mL | |
| Drug, Pharmaceuticals and Cosmetic Preparations | pH | USP 23 | 325.00 | 100mL |
| Viscosity (Brookfield) | ASTM D 2556 | 840.00 | 500mL | |
| Moisture | USP 23 | 600.00 | 100g | |
| PAINTS AND ALLIED PRODUCTS | ||||
| Water-based Paints, Latex, White; Elastomeric; Acrylic Polymer, Copolymer | Chemical resistance |
ASTM D 1308 |
At least 4L sample | |
| Spot Test | 400.00 | Test Panels | ||
| Immersion Test | 650.00 | |||
| Density | ASTM D 1475 | 515.00 | ||
| Dry/Cure time | ASTM D 1640 | 400.00 | ||
| Fineness of Grind | ASTM D 1210 | 380.00 | ||
| Gloss Measurement | ASTM D 523 | 500.00 | ||
| Pigment and Vehicle content | ASTM D 2371 | 1,000.00 | ||
| Titanium Dioxide | ASTM D 1394 | 1,300.00 | ||
| If requested alone | 1,920.00 | |||
| Total Solids, % weight | ASTM D 2369 | 500.00 | ||
| Viscosity (KU) (Stormer) | ASTM D562 | 500.00 | ||
| Volume non-volatile matter | ASTM D2697 | 500.00 | ||
| If requested alone | 1,200.00 | |||
| Water resistance | ASTM D870 | 390.00 | ||
| Organic solvent-based Paints, Enamel, White; Polyurethane | Adhesion | ASTM D 3359 | 375.00 | At least 4L sample |
| Density | ASTM D 1475 | 515.00 | Test panels | |
| Dry/Cure time | ASTM D 1640 | 400.00 | ||
| Fineness of Grind | ASTM D 1210 | 380.00 | ||
| Flexibility | ASTM D 522 | 400.00 | ||
| Gloss Measurement | ASTM D 523 | 500.00 | ||
| Hardness | ASTM D 3363 | 375.00 | ||
| Pigment and Vehicle content | ASTM D 2371 | 1,000.00 | ||
| Titanium Dioxide | ASTM D 1394 | 1,300.00 | ||
| If requested alone | 1,920.00 | |||
| Total Solids, % weight | ASTM D 2369 | 500.00 | ||
| Viscosity (KU) | ASTM D 562 | 500.00 | ||
| Volume non-volatile matter or Total Solids, % volume | ASTM D 2697 | 500.00 | ||
| If requested alone | 1,200.00 | |||
| Primer Paints: Zn Yellow, Red Lead, Ferrous Oxide | Adhesion | ASTM D 3359 | 375.00 | At least 4L sample |
| Density | ASTM D 1475 | 515.00 | Test Panels | |
| Dry/Cure time | ASTM D 1640 | 400.00 | ||
| Fineness of Grind | ASTM D 1210 | 380.00 | ||
| Flexibility | ASTM D 522 | 400.00 | ||
| Gloss Measurement | ASTM D 523 | 500.00 | ||
| Hardness | ASTM D 3363 | 375.00 | ||
| Iron Oxide (Iron Oxide Primer) If requested alone | AAS | 1,920.00 | ||
| Pigment and Vehicle content | ASTM D 2371 | 1,000.00 | ||
| Red Lead (Red Lead Primer) If requested alone | AAS | 1,920.00 | ||
| Total Solids, % weight | ASTM D 2369 | 500.00 | ||
| Viscosity (KU) | ASTM D 562 | 500.00 | ||
| Volume non-volatile matter or Total Solids, % volume | ASTM D 2697 | 500.00 | ||
| If requested alone | 1,515.00 | |||
| Chromium (Zn Yellow Primer) | ASTM D 444 | 1,200.00 | ||
| If requested alone | 1,920.00 | |||
| Zinc (Zn Yellow Primer) If requested alone | AAS | 1,920.00 | ||
| Reflectorized Traffic Marking Paints: White and Yellow | Density | ASTM D 1475 | 515.00 | At least 4L sample |
| Dry/Cure time/No-Pick-Up time | ASTM D 1640/D711 | 400.00 | Test panels | |
| Glassbeads | ||||
| Content | JIS K5665 | 700.00 | ||
| Density | JIS R3301 | 700.00 | ||
| Gradation | ASTM D1214 | 1,250.00 | ||
| Lead, Total (for yellow paint) If requested alone | AAS | 1,920.00 | ||
| Pigment & Vehicle Content | ASTM D237/D4451 | 1,000.00 | ||
| Titanium Dioxide (for white paint) | ASTM D1394 | 1,300.00 | ||
| Total Solids, % weight | ASTM D2369 | 500.00 | ||
| Water resistance | ASTM D870 | 390.00 | ||
| Thermoplastic Powder Paints White and Yellow | Calcium Carbonate | ASTM C25 | 1,100.00 | At least 1kg sample |
| If requested alone | 1,560.00 | |||
| Dry/Cure time | ASTM D1640 | 400.00 | ||
| Glassbeads | ||||
| Content | JIS K5665 | 700.00 | ||
| Density | JIS R3301 | 515.00 | ||
| Gradation | ASTM D1214 | 1,250.00 | ||
| Lead, Total (for yellow paint) If requested alone | AAS | 1,920.00 | ||
| Pigment | ASTM D4451 | 1,000.00 | ||
| Softening Point | ASTM E28 | 870.00 | ||
| Titanium Dioxide (for white paint) If requested alone | ASTM D1394 | 1,300.00 | ||
| Chrome Yellow (for yellow paint) If requested alone | ASTM D1394 | 1,300.00 | ||
| Aluminum Paints | Density | ASTM D1475 | 450.00 | At least 4L sample |
| Dry/Cure time | ASTM D1640 | 400.00 | Test panels | |
| Pigment and Vehicle content | ASTM D2371 | 1,000.00 | ||
| Viscosity (Ford Cup #4 ) | ASTM D1200 | 500.00 | ||
| Volatile and nonvolatile Matter | ASTM D2369 | 600.00 | ||
| Water content | ASTM D95 | 950.00 | ||
| Adhesion | ASTM D3359 | 375.00 | ||
| Chemical resistance | ASTM D1308 | |||
| Spot test | 400.00 | |||
| Immersion test | 650.00 | |||
| Additional Substrate | 120.00 | |||
| Heat resistance | ASTM D2485 | 3,000.00 | ||
| Total Solids, % weight | ASTM D2369 | 500.00 | ||
| Total Solids, % volume | ASTM D2697 | 500.00 | ||
| If requested alone | 1,200.00 | |||
| Avion Blue Enamel Paint | Adhesion | ASTM D3359 | 375.00 | At least 4L sample |
| Chemical resistance | ASTM D1308 | Test panels | ||
| Spot Test | 400.00 | |||
| Immersion Test | 600.00 | |||
| Additional substrate | 120.00 | |||
| Density | ASTM D1475 | 450.00 | ||
| Dry/Cure time | ASTM D1640 | 400.00 | ||
| Fineness of Grind | ASTM D1210 | 380.00 | ||
| Flexibility | ASTM D522 | 400.00 | ||
| Hardness | ASTM D3363 | 375.00 | ||
| Total Solids, % weight | ASTM D2369 | 500.00 | ||
| Viscosity (Ford Cup #4) | ASTM D1200 | 500.00 | ||
| Water resistance | ASTM D870 | 390.00 | ||
| Epoxy Paints | Adhesion | ASTM D3359 | 375.00 | At least 4L sample |
| Chemical resistance | ASTM D1308 | Test panels | ||
| Spot Test | 400.00 | |||
| Immersion Test | 650.00 | |||
| Additional Substrate | 120.00 | |||
| Density | ASTM D1475 | 450.00 | ||
| Dry/Cure time | ASTM D1640 | 380.00 | ||
| Flexibility | ASTM D522 | 400.00 | ||
| Hardness | ASTM D3363 | 375.00 | ||
| Total Solids, % weight | ASTM D2369 | 500.00 | ||
| Total Solids, % volume | ASTM D2697 | 500.00 | ||
| If requested alone | 1,200.00 | |||
| Viscosity (KU) | ASTM D562 | 500.00 | ||
| Water resistance | ASTM D870 | 390.00 | ||
| Adhesives | Viscosity, Krebs Unit | ASTM D1084 | 500.00 | At least 1L/analyte |
| Total Solids (non volatile content) | ASTM D4426 | 500.00 | ||
| Viscosity (Brookfield) | ASTM D1084 | 840.00 | ||
| Glue | pH | PNS 1800:2000 | 400.00 | At least 1L/analyte |
| Free formaldehyde | 700.00 | |||
| Solid Content | 500.00 | |||
| Physical analysis of Fingerprint Taker | Thumbprint Impressions, plain | Sirchie Fingerprint Method | 960.00 | at least 10 pcs |
| ndelible Ink | Silver Nitrate, % w/w | ISTD (Gravimetry/ Titrimetry) | 1,920.00 | at least 150 mL |
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
FOOD AND FEEDS |
||||
|
Foods/Feeds |
Protein |
Block Digestion Method |
1,120.00 |
200 mL or 200 g |
|
|
Ash |
AOAC |
550.00 |
200 g |
|
|
Ash-Acid insoluble |
Gravimetric |
900.00 |
200 g |
|
|
Ash-Water soluble & insoluble |
Gravimetric |
1,020.00 |
200 g |
|
|
Ash-Alkalinity |
Gravimetric |
1,000.00 |
200 g |
|
|
Ash-Alkalinity of Water, Insoluble |
Gravimetric |
1,440.00 |
200 g |
|
|
Ash-Alkalinity of Water Soluble |
Gravimetric |
1,320.00 |
200 g |
|
|
Ash-Sulphated |
Gravimetric |
1,000.00 |
200 g |
|
|
Crude Fiber |
Gravimetric |
1,380.00 |
200 g |
|
|
Moisture |
Gravimetric |
400.00 |
200 g |
|
|
Crude Fat |
Acid hydrolysis |
1,200.00 |
200 g |
|
|
Starch |
Direct acid hydrolysis |
1,200.00 |
200 g |
|
|
Food Energy ( Calories) |
By computation |
90.00 |
500 g |
|
|
Total carbohydrate |
By difference |
90.00 |
500 g |
|
|
Total Dietary Fiber |
AOAC |
7,200.00 |
300 g |
|
|
pH |
AOAC |
325.00 |
200 g |
|
|
Cholesterol |
HPLC |
3,960.00 |
300 g |
|
|
Caffeine |
HPLC |
2,800.00 |
300 g |
|
|
Sorbic Acid |
HPLC |
4,400.00 |
300 g |
|
|
Benzoic Acid |
HPLC |
4,400.00 |
300 g |
|
|
Nitrite in meat |
AOAC |
1,500.00 |
400 g |
|
|
Calcium |
AOAC |
1,920.00 |
1L |
|
|
Iron |
AOAC |
1,920.00 |
500 mL |
|
|
Magnesium |
AOAC |
1,920.00 |
1L |
|
|
Manganese |
AOAC |
1,920.00 |
1L |
|
|
Potassium |
AOAC |
1,920.00 |
1L |
|
|
Sodium |
AOAC |
1,920.00 |
1L |
|
|
Zinc |
AOAC |
1,920.00 |
500 mL |
|
|
Lead |
AOAC |
1,920.00 |
500 mL |
|
|
Cadmium |
AOAC |
1,920.00 |
500 mL |
|
|
Mercury |
Cold Vapor AAS |
1,920.00 |
500 mL |
|
|
Copper |
AOAC |
1,920.00 |
500 mL |
|
|
Phosphorous |
AOAC |
1,920.00 |
500 mL |
|
|
Arsenic |
AOAC |
2,300.00 |
500 mL |
|
|
Acidity (Titratable) in fruit/ veg. product |
AOAC |
540.00 |
300 mL |
|
|
Acidity (Volatile) in fruit/ veg. product |
AOAC |
480.00 |
300 mL |
|
|
Solids (Soluble) in fruit/ veg. Product |
AOAC |
480.00 |
200 mL |
|
|
Solids (Water-insoluble) in fruit/ veg. Product |
AOAC |
360.00 |
200 mL |
|
|
Sodium Chloride |
AOAC |
700.00 |
200 g |
|
|
Solids (Total) |
AOAC |
400.00 |
200 g |
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Sugar and sugar products |
Total Reducing Sugar |
AOAC |
1,100.00 |
200 g |
|
|
Free Reducing Sugar |
AOAC |
840.00 |
200 g |
|
|
Density |
AOAC |
480.00 |
200 g |
|
|
Specific Gravity |
AOAC |
500.00 |
200 g |
|
|
Total Solids (% in syrup) |
AOAC |
480.00 |
100 g |
|
|
Lactose Purity |
HPLC |
2,500.00 |
100 g |
|
|
Fructose Purity |
HPLC |
2,500.00 |
100 g |
|
|
Glucose Purity |
HPLC |
2,500.00 |
100 g |
|
|
Sucrose Purity |
HPLC |
2,500.00 |
100 g |
|
|
Sucrose |
AOAC |
1,125.00 |
200 g |
|
|
Aspartame (Beverage) |
HPLC |
2,400.00 |
200 g |
|
|
Lactose in milk |
HPLC |
2,400.00 |
200 g |
|
|
Glycerol |
HPLC |
2,400.00 |
200 g |
|
Vinegar |
Acid (as Acetic Acid), Total Alcohol Alkalinity of soluble ash Ash Nonvolatile acids Nonvolatile reducing substances Permanganate Oxidation Number Total Solids Total soluble solids Volatile Acids If requested alone |
AOAC 930.35 |
560.00 |
200 mL/ analyte |
|
|
AOAC 930.35 |
600.00 |
|
|
|
|
AOAC 900.02 |
800.00 |
|
|
|
|
AOAC 930.35 |
550.00 |
|
|
|
|
AOAC 930.35 |
650.00 |
|
|
|
|
AOAC 930.35 |
1,200.00 |
|
|
|
|
AOAC 944.10 |
1,200.00 |
|
|
|
|
AOAC 930.35 |
400.00 |
|
|
|
|
AOAC 930.35 |
480.00 |
|
|
|
|
AOAC 930.35 |
480.00 |
|
|
|
|
|
1,140.00 |
|
|
|
Fats and Oils |
Specific Gravity |
AOAC 985.19 |
500.00 |
200 mL/analyte
1L 200 mL/ analyte |
|
|
Fatty Acid Profile |
GC |
2,400.00 |
|
|
|
(For solid food, additional fee for extraction) |
|
1,080.00 |
|
|
|
Free Fatty Acid/Acid No. |
AOAC 940.28 |
500.00 |
|
|
|
Index of Refraction |
AOAC 921.08 |
400.00 |
|
|
|
Iodine Absorption Number |
AOAC 920.158/159 |
600.00 |
|
|
|
Melting Point of Fat/Fatty Acid |
AOAC 920.157 |
500.00 |
|
|
|
Moisture/Volatile Matter |
AOAC 962.12 |
450.00 |
|
|
|
Peroxide Value |
AOAC 965.33 |
600.00 |
|
|
|
Saponification Value |
AOAC 920.160 |
800.00 |
|
|
|
Specific Gravity |
AOAC 920.212 |
500.00 |
|
|
|
Unsaponifiable Matter |
AOAC 033.08 |
1,320.00 |
|
|
|
Viscosity (Brookfield) |
ASTM D 2564/1084 |
840.00 |
|
|
|
Viscosity (Cannon-Fenske) |
ASTM D445 |
600.00 |
|
|
Vitamins in Food/Feeds |
Vitamin A (Retinol) |
HPLC |
3,750.00 |
300 g/analyte |
|
|
Total Vitamin A (Retinol + ß-carotene) |
HPLC |
7,000.00 |
|
|
|
ß-carotene |
HPLC |
4,000.00 |
|
|
|
Vitamin E |
HPLC |
4,200.00 |
|
|
|
Niacinamide in juice |
HPLC |
3,500.00 |
|
|
|
Vitamin B1 |
HPLC |
3,500.00 |
|
|
|
Vitamin B2 |
HPLC |
3,500.00 |
|
|
|
Vitamin B6 |
HPLC |
3,500.00 |
|
|
|
Vitamin C |
HPLC |
3,000.00 |
|
|
Distilled Liquors/Wines/Beer |
Acids Total Acids Fixed Acids Volatile acids (If requested alone) Alcohol Ash Ethanol/Methanol
Fusel Oil Higher Alcohol & Ethly Acetate
Specific Gravity Total Aldehydes Total Acidity (for wines as Tartaric, Malic or Citric) |
AOAC |
|
1L |
|
|
|
560.00 |
|
|
|
|
|
600.00 |
|
|
|
|
|
1,140.00 |
|
|
|
|
GC |
1,800.00 |
1L |
|
|
|
AOAC |
550.00 |
500 mL |
|
|
|
GC |
1,800.00 1st analyte |
1L |
|
|
|
|
+600.00 add'l |
|
|
|
|
|
analyte |
|
|
|
|
GC |
1,800.00 |
1L |
|
|
|
AOAC |
1,800.00 1st analyte |
1L |
|
|
|
|
+600.00 add'l |
|
|
|
|
|
analyte |
|
|
|
|
AOAC |
500.00 |
500 mL |
|
|
|
AOAC |
600.00 |
1L |
|
|
|
AOAC |
560.00 |
500 mL |
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Ethyl Alcohol |
Acetone |
GC |
1,800.00 |
200 mL |
|
|
Benzene |
GC |
1,800.00 |
200 mL |
|
|
Purity |
GC |
1,800.00 |
200 mL |
|
|
Fusel Oil & Amyl Alcohol |
GC |
1,800.00 |
200 mL |
|
Organic Solvent and |
Density |
ASTM |
480.00 |
200 mL |
|
Chemicals |
Acidity |
ASTM D1613 |
840.00 |
200 mL |
|
|
Water Miscibility |
ASTM D1722 |
480.00 |
200 mL |
|
|
pH |
ASTM E 70 |
360.00 |
200 mL |
|
|
Purity |
GC |
1,800.00 |
200 mL |
|
|
Residue on Evaporation |
ASTM D 1353 |
720.00 |
200 mL |
|
|
Refractive Index |
Refractometric Method |
400.00 |
200 mL |
|
|
Viscosity (Brookfield) |
ASTM |
840.00 |
500 mL |
|
|
Flash Point, TCT |
ASTM |
700.00 |
300 mL |
|
Disinfectant |
Benzalkonium Chloride content |
USP |
1,200.00 |
200 mL |
|
|
Viscosity (Brookfield) |
ASTM |
840.00 |
1L |
|
|
pH |
ASTM E 70 |
400.00 |
200 mL |
|
Toilet Soap/Laundry Soap |
Moisture & Volatile Matter Total Matter Insoluble (alcohol+NaCl) Free Alkali (as NaOH or Na2O) Matter insoluble in Water If requested alone Anhydrous soap |
PNS |
720.00 |
200 g |
|
|
PNS |
1,320.00 |
200 g |
|
|
|
PNS |
720.00 |
200 g |
|
|
|
PNS |
720.00 |
200 g |
|
|
|
PNS |
1,080.00 |
200 g |
|
|
|
PNS |
1,440.00 |
200 g |
|
|
Other Test |
FTRI Scan |
FTIR |
620.00 |
|
|
|
Viscosity (Brookfield) |
ASTM |
840.00 |
1L |
|
pH |
ASTM E 70 |
360.00 |
200 mL |
|
|
Toilet Soap/Laundry Soap |
Moisture & Volatile Matter Total Matter Insoluble (alcohol+NaCl) Free Alkali (as NaOH or Na2O) Matter insoluble in Water If requested alone Anhydrous soap |
PNS |
720.00 |
200 g |
|
|
PNS |
1,320.00 |
200 g |
|
|
|
PNS |
720.00 |
200 g |
|
|
|
PNS |
360.00 |
200 g |
|
|
|
PNS |
1,080.00 |
200 g |
|
|
|
PNS |
1,440.00 |
200 g |
|
|
Other Test |
FTRI Scan |
FTIR |
590.00 |
|
CHEMISTRY LABORATORY INORGANIC CHEMISTRY SECTION
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Water (Deepwell, |
Acidity as CO2 |
Titrimetry |
500.00 |
Not less than 6L |
|
Spring, Distilled, Deionized, Bottle) and Wastewater (Effluent, Influent) |
|
|||
|
Alkalinity as CaCO3 Aluminum Arsenic Anions (F, Cl, NO2, Br, NO3,PO4, SO4) Succeeding ions Bicarbonates Cadmium Cadmium Calcium Calcium Chloride Chlorine (Residual) Chromium Chromium Color Conductivity
Copper Copper Extractable Chloride Extractable Ions Iron Iron Lead Lead Magnesium Magnesium Manganese Manganese Mercury Mercury Nickel Nickel Nitrogen (Ammonia-Nitrogen) Nitrogen (Organic) pH Phosphorus Potassium Silica Silicon Silver Sodium Sulfate Total Hardness Total Dissolved Solids Total Suspended Solids Total Solids Turbidity Zinc Zinc |
Titrimetry GF-AAS HVG-AAS |
500.00 1,500.00 1,500.00 |
||
|
|
IC |
1,100.00 (1st analyte) |
|
|
|
|
|
800.00 |
|
|
|
|
Titrimetry |
500.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
GF-AAS |
1,500.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
EDTA Titration |
700.00 |
|
|
|
|
Argentometric titration |
750.00 |
|
|
|
|
Iodometric |
750.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
GF-AAS |
1,500.00 |
|
|
|
|
Platinum Standard |
700.00 |
|
|
|
|
Electrical Conductivity Method |
350.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
GF-AAS |
1,500.00 |
|
|
|
|
Titrimetry(Argentometric) |
1,000.00 |
|
|
|
|
IC |
1,100.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
GF-AAS |
1,500.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
GF-AAS |
1,500.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
EDTA-By difference |
700.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
GF-AAS |
1,500.00 |
|
|
|
|
Cold Vapor AAS |
1,500.00 |
|
|
|
|
CV-AFS |
1,550.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
|
|
GFAAS |
1,500.00 |
|
|
|
|
Distillation/Titration |
850.00 |
|
|
|
|
Kjeldahl Titration |
950.00 |
|
|
|
|
pH Potentionetry |
350.00 |
|
|
|
|
Colorimetry |
700.00 |
|
|
|
|
AAS/Flame Emission |
1,200.00 |
|
|
|
|
Gravimetry |
800.00 |
|
|
|
|
UV-Vis |
800.00 |
|
|
|
|
AAS |
800.00 |
|
|
|
|
AAS/Flame Emission |
1,200.00 |
|
|
|
|
Turbidimetry/Gravimetry |
850.00 |
|
|
|
|
EDTA Titration |
700.00 |
|
|
|
|
Gravimetry |
600.00 |
|
|
|
|
Gravimetry |
650.00 |
|
|
|
|
Gravimetry |
700.00 |
|
|
|
|
Turbidimetry |
300.00 |
|
|
|
|
GF-AAS |
1,500.00 |
|
|
|
|
AAS |
1,200.00 |
|
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Pipes (uPVC, etc.) |
Extractable Pb (First and Third Extraction) |
GF-AAS |
6,400.00 |
3 pcs sample if diameter 5 cm length – 0.5m 6 pcs sample if diameter cm length – 1m (Max diam accepted = 10 cm) Sealed at one end |
|
Ceramics and Plastic Containers for Foodstuff |
Extractable Metals |
GF-AAS |
2000 per element |
at least 100mL |
|
Toys and Other Related Materials |
Extractable Metals |
GF-AAS |
1800 per element |
at least 100mL |
|
Chemical/Reagents |
Arsenic |
Mercuric Bromide Stain |
800.00 |
For powder sample – |
|
KOH – Caustic potash NaOH – Caustic Soda NaHCO3 – Baking Soda NaHCO3 – tartaric acid + baking powder Na2CO3 – Soda ash |
Arsenic Assay Chloride Heavy Metals as Pb Insoluble Residue pH (liquid) |
HVG-AAS Titrimetry Titrimetry Colorimetry Gravimetric ASTM E70 |
1,500.00 650.00 700.00 800.00 600.00 400.00 |
100g For liquid sample – 100mL |
|
|
Specific Gravity, Hydrometer |
ASTM D891 |
300.00 |
|
|
|
Specific Gravity, Pycnometer |
ASTM D891 |
500.00 |
|
|
|
Sulfate |
Turbidimetry |
850.00 |
|
|
|
Trace Metals |
AAS (Std addition) |
1,200.00 |
|
|
|
|
|
per element |
|
|
Bleaching Powder/ Solution, Detergents, Sodium/Calcium Hyprochloride |
Available Chlorine Alkalinity |
ASTM D2022 ASTM D2022 |
700.00 650.00 |
For powder sample – 100g For liquid sample – 100mL |
|
Plating Solution |
Metals (Ag, Au, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn, etc) |
AAS |
880.00 per metal |
at least 100mL |
|
Powder Granules |
Bulk/Packed Density |
ASTM C110 |
450.00 |
at least 500g |
|
|
pH |
pH Potentiometry |
400.00 |
|
|
|
Sieve Analysis (one mesh) |
ASTM C110 |
400.00 |
|
|
|
Sieve Analysis (succeeding mesh) |
ASTM C110 |
230.00 |
|
|
Salt/Sodium Chloride |
Complete Chemical Analysis (NaCl. Moisture,, Water Insolubles, Ca, Mg, SO4) Acid Insolubles Calcium Iodine (as received) Magnesium Moisture Assay, NaCl (as received) Sulfate Water Insolubles |
AOAC 925.55
AOAC 925.55 ASTM E534 AOAC 925.56 ASTM E534 AOAC 925.55 Argentimetric Titration AOAC 925.55 AOAC 925.55 |
5,000.00
600.00 700.00 700.00 700.00 650.00 700.00 800.00 600.00 |
at least 250g-1 kg sample for Complete Chemical Analysis |
|
Soil, Sediments, Sludge |
Arsenic |
HVG AAS |
1,500.00 |
at least 250g |
|
|
Metals (Cd, Ca, Cr, Cu, Fe, Pb, Mg, Mn, Ni, P, K, Na, Zn) |
AAS |
1,000.00 per element |
|
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Clay and Related |
Complete Chemical Analysis |
JISM 5584 |
6,500.00 |
at least 250g |
|
Materials, Pozzalan |
(SiO2, Fe2O3, Al2O3, TiO2, CaO, |
|
|
|
|
Cement/Perlite/ |
MgO, Na2O, K2O, LOI) |
|
|
|
|
Zeolite/Refractories/ Fly Ash Sand/Silica Sand (99.9 % SiO2) Diatomaceous Earth (77% SiO2) Rice Hull (90% SiO2) |
Alumina Calcium Oxide Iron Oxide Loss on Ignition Magnesium Oxide |
JISM 5584 JISM 5584 JISM 5584 JISM 5584 JISM 5584 |
850.00 800.00 850.00 700.00 1,100.00 |
|
|
Ceramics/Glass |
Moisture |
JISM 5584 |
600.00 |
|
|
Borosilicate glass |
Potassium Oxide |
JISM 5584 |
800.00 |
|
|
|
Silica |
JISM 5584 |
1,070.00 |
|
|
|
Sodium Oxide |
JISM 5584 |
800.00 |
|
|
|
Titania |
JISM 5584 |
800.00 |
|
|
|
Manganese Oxide |
AAS |
900.00 |
|
|
|
Boron Oxide |
Titrimetry ASTM 169-92 |
1,500.00 |
|
|
Limestone (CaCO3), |
Complete Chemical Analysis (SiO2, |
ASTM C25 |
4,500.00 |
at least 250g |
|
Quicklime (CaO), |
Fe2O3, Al2O3, CaO, MgO, LOI |
|
|
|
|
Hydrated Lime (Ca(OH)2), Scales, etc. Calcite -CaCO3 Lime – CaO (apog) |
Alumina Available Lime Index Calcium Oxide Iron Oxide |
ASTM C25 ASTM C25 ASTM C25 ASTM C25 |
1,310.00 500.00 650.00 800.00 |
|
|
|
Loss on Ignition |
ASTM C25 |
600.00 |
|
|
|
Magnesium Oxide |
ASTM C25 |
1,100.00 |
|
|
|
Moisture |
ASTM C25 |
600.00 |
|
|
|
Potassium Oxide |
ASTM C25 |
800.00 |
|
|
|
Sodium Oxide |
ASTM C25 |
800.00 |
|
|
|
Silica |
ASTM C25 |
1,320.00 |
|
|
|
Phosphorous Pentoxide, (P2O3) |
ASTM C25 |
1,310.00 |
|
|
Gypsum (CaSO4.2H2O) |
Complete Chemical Analysis |
ASTM C471 |
6,500.00 |
at least 250g |
|
and Gypsum Products, |
(CaSO4.2H2O, CaSO4, SIO2 and Insoluble, R2O3, CaO, MgO, SO3) |
|
|
|
|
|
Aluminum Oxide |
ASTM C471 |
805.00 |
|
|
|
Anhydrite (CaSO4) |
ASTM C471 |
800.00 |
|
|
|
Calcium Oxide |
ASTM C471 |
800.00 |
|
|
|
Combined Water |
ASTM C471 |
750.00 |
|
|
|
Free Water |
ASTM C471 |
500.00 |
|
|
|
Iron and Aluminum Oxides (mixed oxides) |
ASTM C471 |
700.00 |
|
|
|
Iron Oxide |
ASTM C471 |
850.00 |
|
|
|
Magnesium Oxide |
ASTM C471 |
1,100.00 |
|
|
|
Purity as CaSO4.2H2O |
ASTM C471 |
800.00 |
|
|
|
Silica and Insoluble Matter |
ASTM C471 |
800.00 |
|
|
|
Sodium Chloride |
ASTM C471 |
500.00 |
|
|
|
Sulfate/Sulfur Trioxide |
ASTM C471 |
930.00 |
|
|
Boiler Scale |
Moisture Organic & Volatile Matter |
Tech. Method of Analysis by Griffin |
600.00 650.00 |
100-150 g |
|
|
Silica |
|
1,320.00 |
|
|
|
Iron & Aluminum Oxide |
|
1,320.00 |
|
|
|
Lime (CaO) |
|
650.00 |
|
|
|
Magnesia (MgO) |
|
1,100.00 |
|
|
|
Sulfur Trioxide |
|
930.00 |
|
|
|
Chloride |
|
700.00 |
|
|
|
Phosphate |
|
800.00 |
|
|
Fertilizers and Related Materials Organic Fertilizer |
Micronutrients (Ca, Cu, Fe, Mg, Mn, Ni, Zn) Moisture |
AAS
AOAC |
1,200.00 per element 600.00 |
For solid sample–at least 200g For liquid sample– at least 200mL |
|
|
Nitrogen |
Kjeldahl Titration |
1000.00 |
|
|
|
Phosphorus |
Colorimetry |
1,000.00 |
|
|
|
Potassium |
AAS |
1,000.00 |
|
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Cement (Hydraulic, |
Complete Chemical Analysis (SiO2, |
ASTM C114 |
5,800.00 |
at least 250g |
|
Portland) |
Fe2O3, Al2O3, TiO2, CaO, MgO, |
|
|
|
|
Aggregates |
SO3, LOI, Insoluble Residue) |
|
|
|
|
|
Alumina |
ASTM C114 |
850.00 |
|
|
|
Silica |
ASTM C114 |
800.00 |
|
|
|
Calcium Oxide |
ASTM C114 |
800.00 |
|
|
|
Insoluble Residue |
ASTM C114 |
700.00 |
|
|
|
Iron Oxide |
ASTM C114 |
850.00 |
|
|
|
Loss on Ignition |
ASTM C114 |
700.00 |
|
|
|
Magnesium Oxide |
ASTM C114 |
1,100.00 |
|
|
|
Potassium Oxide |
ASTM C114 |
800.00 |
|
|
|
Sodium Oxide |
ASTM C114 |
800.00 |
|
|
|
Sulfate/Sulfur Trioxide |
ASTM C114 |
930.00 |
|
|
|
Titania |
ASTM C114 |
800.00 |
|
PHYSICAL AND PERFORMANCE TESTING LABORATORIES
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Sacks |
Breaking Strength One Way Other Way Bursting Strength Fabric Count One Way Other Way |
|
|
3 pieces of whole sack per |
|
ASTM D5034 |
600.00 |
sample |
||
|
|
ASTM D5034 |
600.00 |
|
|
|
|
ASTM D3786 |
450.00 |
|
|
|
|
ASTM D3775 |
200.00 |
|
|
|
|
ASTM D3775 |
200.00 |
|
|
|
Duty Free Shopping bag |
Required Test Tensile / Elongation Tear Strength Sealing Strength Handle Performance Thickness Sample Conditioning |
ASTM D882 |
|
20 Bags/Size
|
|
|
ASTM D882 |
600.00 |
|
|
|
|
ASTM D1004 |
600.00 |
|
|
|
|
ASTM D882 |
600.00 |
|
|
|
|
ASTM D882 |
600.00 |
|
|
|
|
|
200.00 |
|
|
|
|
ASTM D618 |
1,500.00 |
|
|
|
Perlite Insulation |
Density
Moisture content
Conditioning ( Oven & 24 Hr. @ 23 C , 50% RH) Flexural Strength Compressive Strength |
ASTM C303 |
350.00 |
200mm x 100mm x 50mm, 5 pcs |
|
|
ASTM C610 sec 11.1.7 |
350.00 |
150mm x 150mm x 50mm , |
|
|
|
|
|
5 pcs |
|
|
|
|
1,000.00 |
|
|
|
|
ASTM C203 |
600.00 |
12 in x 4 in x 1 in , 5 pcs |
|
|
|
ASTM C165 |
600.00 |
4 in x 6 in x ½ in , 5 pcs |
|
|
PVC Pipes |
Resistance to Acetone |
ISO 3472 |
250.00 |
5 pcs ( 100mm x 25 mm ) |
|
|
Resistance to H2SO4 for 14 days days @ 55°C |
ISO 3473 |
9,400.00
700.00 |
5 pcs (area / pc 45 ± 3 cm3 ) (for 3 size additional) |
|
|
Longitudinal Heat Reversion Test |
ISO 2505 |
350.00 |
5 pcs ( L = 200 mm ) |
|
|
Vicat Softening Point |
ISO 2507 |
1,000.00 |
5 pcs ( L = 50 mm , W = 10 |
|
to 20mm , t= 2.4 to 6 mm) |
||||
|
|
|
|
|
( if t= 2.4 mm , use two |
|
|
|
|
|
layers of at least t=2.4 total. |
|
|
|
|
|
Thickness ) |
|
|
Water Absorption |
ISO 2508 |
1,000.00 |
5 pcs ( area / pc 50 cm2 for |
|
|
|
|
|
pipes w/ 32 mm OD or L = 5 |
|
|
|
|
|
cm and arc 5 cm for pipes |
|
|
|
|
|
with OD > 32 mm ) |
|
|
Flattening Test |
ASTM D2241 |
1,000.00 |
5 pcs. ( L = 2 inches |
|
|
Resistance of External Blows ( Drop Impact ) |
ISO 3127 |
1,500.00 |
pcs. ( L= 10 inches ) |
|
|
Hydrostatic Test |
ISO 1167 |
1,500.00 |
250mm + 3x O.D + 100 mm, |
|
|
|
|
|
5 pcs pipe |
|
Rubber Products |
Aging Test |
ASTM D573 |
|
Same as Tensile & tear Resistance Test |
|
|
22 h |
|
1,100.00 |
|
|
|
48 h |
|
2,400.00 |
|
|
|
70 h |
|
3,500.00 |
|
|
|
72 h |
|
3,600.00 |
|
|
|
96 h |
|
4,800.00 |
|
|
|
100 h |
|
5,000.00 |
|
|
|
168 h |
|
8,400.00 |
|
|
|
336 h |
|
16,800.00 |
|
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
|
Compression Set |
ASTM D395 |
1,000.00 |
5 pieces , cylindrical disk |
|
|
|
|
type, 1”diameter |
|
|
|
|
|
@ 12 mm Thickness |
|
|
Density / Specific gravity |
ASTM D792 |
450.00 |
50 grams , granule, pellets , |
|
|
|
|
|
solids 1mm thickness / |
|
|
|
|
|
1gram |
|
|
Durometer Hardness |
ASTMD2240 ISO 868 vol.1 |
250.00 |
2 pieces flat surface 10 x 10 |
|
|
|
|
|
cm , t=6mm min |
|
|
Tensile Strength & Elongation |
ASTM D412 |
600.00 |
2 sheets , 305mm x |
|
|
|
|
|
305mm x t mm (1.3 < t < |
|
|
|
|
|
3 ) |
|
|
Tear Resistance |
ASTM D624 |
600.00 |
|
|
|
Sampling Fee |
|
150.00/ test |
|
|
|
Abrasion Resistance |
ASTM D4060 |
1,500.00 |
4” x 4”, 1/8 “t or less, 5 pcs |
|
|
Plastic Products |
Chemical Immersion Test |
ASTM D543 |
350.00 |
50mm L x 25.4mm W, 5 pcs |
|
|
Compression (W x H x L) |
ASTM D695 |
600.00/ 1,000.00 |
½ “x ½ “ x 2 , 5 pcs |
|
|
Flexural Strength |
ASTM D790 |
600.00/ |
5 pieces , smooth flat |
|
|
1,000.00 |
surface , L=16 x thickness |
||
|
|
|
|
|
+20mm Depth = 13mm , |
|
|
|
|
|
Width 3 to 13mm |
|
|
Water Absorption |
ASTM D570 |
350.00 |
50mmL x 25.4mm W, 5 pcs |
|
|
Tension Test |
ASTM D638/ |
600.00/ |
5 pieces dumbbell shape , |
|
|
|
D882 |
1,000.00 |
or W= 10 mm to 25.4 mm |
|
(15mm Preferably) |
||||
|
|
|
|
|
L=125mm to 250 mm |
|
|
Heat Deflection Temperature |
ASTM D648 |
1,000.00 |
5 pieces, smooth flat |
|
surface, L =127mm |
||||
|
|
|
|
|
Width=13mm, Thickness= 3 |
|
|
|
|
|
to 13mm |
|
|
Vicat Softening Point |
ASTM D1525 |
1,000.00 |
5 pcs ( L = 50 mm , W = 10 |
|
|
|
|
|
to 20mm , t= 2.4 to 6 mm) |
|
|
|
|
|
( if t= 2.4 mm , use two |
|
|
|
|
|
layers of at least t=2.4 total |
|
|
|
|
|
Thickness ) |
|
|
Izod Impact |
ASTM D256 |
650.00 |
L=63.5 or 60.3mm, t=3.17 to |
|
|
|
|
|
3.4 mm, W= 12.7 mm, |
|
|
|
|
|
10 pcs |
|
|
Charpy Impact |
ASTM 179 |
650.00 |
4.0 mm x 80 mm, 10 pcs |
|
|
Hardness Test |
ASTM 2240 |
250.00 |
2 pieces flat surface 10 x 10 |
|
|
|
|
|
cm , t=6mm min |
|
|
Abrasion Resistance Test |
ASTM D4060 |
2,000.00 |
4” x 4” 1/8”t or less |
|
|
|
|
|
5 pcs |
|
|
Conditioning ( at least 40 Hrs @ 23 +/- |
|
1,000.00 |
|
|
|
2° C , 50 +/- 5 % RH) |
|
|
|
|
Epoxy |
Compression |
ASTM C356 |
600.00/ 1,000.00 |
2” x2 “ x 2”, 5 pcs |
|
Plastic Resin |
Melting point |
ASTM D2117 |
300.00 |
100 grams ( granules , pellets or powder |
|
|
Melt flow Rate |
ASTM D1238 |
1,000.00 |
100 grams ( granules , pellets or powder |
|
|
Density |
ASTM D792 |
450.00 |
100 grams ( granules , pellets or powder |
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
PVC Powder |
Bulk Density/Apparent Density |
ASTM D1895 |
250.00 |
0.5 kilograms |
|
Particle Board |
Density |
Philsa 106 / App.B/D |
|
|
|
|
Block |
|
350.00 |
5 pcs , 6 “ x 6 “ |
|
|
Pipe |
|
350.00 |
1 pipe section |
|
|
Compression |
|
600.00 |
5 pcs , 6 “ x 6 “ |
|
|
Flexural |
|
600.00 |
5 pcs , 12 “ L x 4 “ W x 2 “ T |
|
|
Water Absorption |
|
350.00 |
5 pcs , 6 “ x 6 “ |
|
|
Linear shrinkage |
|
400.00 |
5 pcs , 6 “ x 6 “ |
|
Adhesive / Sealant |
Peel strength |
ASTM D903 |
600.00/ 1,000.00 |
10 pcs , 12 “ L x 1 “ W overlap by 6” |
|
|
Shear strength |
ASTM D1002 |
600.00/ |
10 pcs , 5 “ L x 1 “ W |
|
|
1,000.00 |
overlap by 1 “ |
||
|
|
Sampling Fee |
BS 3261 |
150.00 |
|
|
Vinyl Tiles |
Tension Test |
|
600.00/ 1,000.00 |
10 pcs , 12 “ x 12 “ |
|
|
Resistance Test/ chemicals |
|
350.00 |
|
|
|
Dimension Test |
|
600.00 |
|
|
|
Size |
|
200.00 |
|
|
|
Thickness |
|
200.00 |
|
|
|
Width |
|
200.00 |
|
|
|
Taber Abrasion |
ASTM D4060 |
1,500.00 |
4 “ x 4” , 5 pcs |
|
Joint Filler |
Compression Recovery Density Water Absorption |
ASTM D505 |
2,200.00 |
2 pcs , 12“ x 12“ |
|
School and Office Supplies: |
||||
|
Masking / Scotch / Packaging Tape |
Adhesive Strength |
PNS 712 |
1,000.00 |
3 rolls |
|
Glue |
Adhesive Strength |
PNS 1800-2006 |
600.00 |
2 jar |
|
Rubber Band |
Tensile Strength / Elongation/ |
PNS 1479 |
600.00 |
1 box or 100 pcs |
|
|
Dimensional Measurements |
|
200.00 |
|
|
Ball Point Pens & Refills |
Writing Performance |
ISO 12757 – 2 |
400.00 |
10 pcs. |
|
|
Drying Time Test |
PNS 558 |
400.00 |
|
|
|
Water resistance |
|
350.00 |
|
|
White Board Marker |
Writing Performance |
PNS 1227 |
400.00 |
15 pcs. |
|
|
Impact Resistance |
|
600.00 |
|
|
|
Heat Resistance |
|
|
|
|
|
Shaft Holding Force Point |
|
600.00 |
|
|
|
Primary Erase ability |
|
400.00 |
|
|
Permanent Pen |
Writing Performance |
PNS 2049 |
400.00 |
15 pcs |
|
|
Impact Resistance |
|
600.00 |
|
|
|
Shaft Holding Force Point |
|
600.00 |
|
|
|
Drying Time |
|
400.00 |
|
|
|
Resistance to Water |
|
400.00 |
|
|
Paper Fastener |
Bend Test |
PNS 235 |
400.00 |
10 pcs. |
|
Chalk |
Breaking Strength |
PNS 1122 |
600.00 |
25 pcs. |
|
Pencil |
Breaking Strength |
PNS 1413 |
600.00 |
10 pcs. |
|
Lead for Mechanical Pencil |
Bending Strength |
PNS 1471 -3 ( ISO 9177-3 |
600.00 |
12 pcs. Or 1 box |
|
Crayons |
Performance Test |
PNS 1224 |
600.00 |
1 box |
|
Adhesive Tape |
Adhesive Strength |
PNS 712 |
1,000.00 |
5 rolls |
|
PVC Electrical Tape |
Exposure to Heat 113°C (168 h ) |
PNS: 79 |
8,400.00 |
10 rolls |
|
|
Tension |
|
600.00 |
|
|
|
Appearance |
|
250.00 |
|
|
|
Peeling Off |
|
600.00 |
|
|
|
Tension After heat Aging @ 100°C for 4 |
|
700.00 |
|
|
|
hr. |
|
|
|
|
Crane and other Lifting Equipment |
Load Testing, 50 Tons & 200 Tons |
ISO 4310 |
3,500.00 |
|
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Burned Refractory Brick |
Bulk Density |
ASTM C20-Sec 12 |
400.00 |
3 pcs, 50 mm cube |
|
|
Water Absorption |
|
350.00 |
3 pcs 76.2 mm cube |
|
Concrete Interlocking |
Transverse |
Philsa 242 |
400.00 |
6 pcs full size |
|
Roofing Tiles |
|
|
|
|
|
|
Water Absorption |
|
350.00 |
|
|
Concrete Hollow Block |
Compression |
ASTM C39 |
1,000.00 |
5pcs /size |
|
Concrete Cylinder |
Compression |
|
1,000.00 |
3 pcs, 152.4 mm x 304 mm with capping |
|
Wire Rod |
Tension Test |
ASTM A370 |
600.00 |
3 pcs, 13” L |
|
|
Flexural/Bend Test |
|
600.00 |
5 pcs, 12” L |
|
Hydraulic Cement Mortar |
Compression |
ASTM C109 |
1,000.00 |
3 pcs, min. 50 mm cube |
|
Cement Powder |
Permeability Test/ Fineness of Hydraulic Cement |
ASTM C204 |
400.00 |
1 kg powder cement |
|
|
Initial & Final Setting of cement |
ASTM C191 |
800.00 |
|
|
Weathermeter |
Exposure test |
ASTM G155 |
6000.00/ day |
Tray size: 28” x 17.5” |
|
|
Observation |
|
300.00/ sample |
|
BIOLOGICAL LABORATORY
PHARMACOLOGY AND TOXICOLOGY SECTION
Note: Fees are exclusive of laboratory animals and animal feeds.
|
SAMPLE NAME |
TEST NAME |
TEST METHOD |
TEST FEE (PhP) |
SAMPLE REQUIREMENT |
|
Plant Isolates/ Food Supplements |
Approximate Lethal Dose Analgesic (Plantar) |
OECD Guideline 401 Hargreaves Method |
7,900.00 4,800.00 |
50 g 50 g |
|
|
Anti-inflammatory Test |
Winter Method |
4,200.00 |
50 g |
|
|
Diuretic Test |
Lipschitz Method |
3,800.00 |
50 g |
|
|
Acute Oral Toxicity (LD50) |
OECD Guideline 401 |
20,000.00 |
500 g/1 L |
|
Cosmetics |
Preliminary Dermal Irritation |
OECD Guideline 404 |
7,250.00 |
50 g |
|
|
Dermal Irritation |
OECD Guideline 404 |
11,750.00 |
100 g |
|
|
Preliminary Eye Irritation |
OECD Guideline 405 |
7,250.00 |
50 g |
|
|
Eye Irritation |
OECD Guideline 405 |
11,750.00 |
100 g |
|
|
Dermal Sensitization |
OECD Guideline 406 |
48,500.00 |
500 g/1 L |
|
Pesticides |
Acute Oral Toxicity (LD50) |
OECD Guideline 401 |
42,500.00 |
1 L |
|
|
Acute Dermal Toxicity |
OECD Guideline 402 |
52,500.00 |
1 L |
|
|
Dermal Irritation |
OECD Guideline 404 |
20,000.00 |
1 L |
|
|
Eye Irritation |
OECD Guideline 405 |
25,000.00 |
1 L |
|
|
Dermal Sensitization |
OECD Guideline 406 |
48,500.00 |
1 L |
|
Household Pesticides |
Acute Oral Toxicity (LD50) Acute Dermal Toxicity |
OECD Guideline 401 OECD Guideline 402 |
21,200.00 29,000.00 |
1 L 1 L |
|
Aerosols, EC Fumigants, Insect Sprays |
Knockdown and Mortality For Flying and Crawling Insects |
Glass Cylinder Method |
33,000.00 |
50g |
|
Larvicides |
Mosquito Larvicidal Test |
Probit Method |
23,000.00 |
50g |
|
Lotion, Spray, Soap, Mothballs |
Repellency Test for Mosquitoes |
Arm in Cage Method |
33,000.00 |
100 g |
|
Repellency Test for Cockroaches |
Ebeling Method |
33,000.00 |
100 g |
|
|
Fumigants, Insect Spray, EC |
Residual Activity Test |
Cone Test Method |
35,000.00 |
100 g |
|
Mosquito Coil |
Knockdown and Mortality For Flying and Crawling Insects |
Glass Cylinder Method |
33,000.00 |
25g |
|
Plant extracts |
Knockdown and Mortality Test |
Glass Cylinder Method |
7,500.00 |
50 g |
|
Mosquito Larvicides |
Probit Method |
6,840.00 |
100 g |
|
|
Repellency Test |
Arm in Cage Method |
7,500.00 |
100 g |
|
SAMPLE NAME |
TEST NAME |
TEST FEE (PhP) |
TEST METHOD |
SAMPLE REQUIREMENT |
|
Single Sample Testing |
||||
|
Water |
Bacteriological Examination A (HPC + Coliform Count) |
1,100.00 |
Standard Methods for the Examination of Water and |
-At least 120 mL x 1 -FDA Requirement: At least 120 |
|
|
Bacteriological Examination B (HPC, Coliform Count + E. coli Count) |
1,700.00 |
Wastewater (SMEWW) 22nd Edition, 2012 APHA, AWWA, WEF |
mL x 5 Sample Submission: Mondays, Tuesdays and Wednesdays 8:00 |
|
|
Bacteriological Examination C (HPC, |
1,200.00 |
|
AM – 12:00 NN |
|
|
Coliform Count + Fecal Coliform Count) |
|
|
|
|
|
Bacteriological Examination D (Total Coliform Count+ Fecal Coliform Count) |
650.00 |
|
|
|
|
Heterotrophic Plate Count (HPC) |
550.00 |
|
|
|
|
Total Coliform Count |
550.00 |
|
|
|
|
E. coli Count |
1,000.00 |
|
|
|
|
Pseudomonas sp. Count |
900.00 |
|
|
|
Food, Cosmetics, Extracts, Veterinary Products etc. |
Aerobic / Total / Standard Plate Count Total Coliform Count E. coli Count |
550.00 550.00 1,000.00 |
Bacteriological Analytical Manual, Online 2001 US Food and Drug Administration |
-At least 100 g/mL x 1 -FDA Requirement: At least 100 g/mL x 5 |
|
|
Molds and Yeast Count |
550.00 |
|
|
|
|
Salmonella sp. Detection, Presumptive (Conventional) |
900.00 |
|
|
|
|
Staphylococcus aureus Count |
1,200.00 |
|
|
|
|
Pseudomonas sp. Count |
720.00 |
|
|
|
|
Commercial Sterility (Low acid, pH more than 4.6) |
2,000.00 |
|
-At least 100 g/mL x 5 -FDA Requirement: At least 100 g/mL x 10 |
|
Plant Extracts, Cosmetics, Disinfectants etc. |
Antimicrobial Activity (E. coli, S. aureus, P. aeruginosa, S. typhimurium, B. subtilis) Antifungal Activity (S. cerevisiae, C. albicans, A. niger, F. monoliforme, T. mentagrophytes, T. rubrum, Microsporum canis) |
600.00
600.00 |
The US Pharmacopeia 30 NF 25, 2007 (Disc Diffusion Method) |
-At least 50 mL Test depends on the availability of cultures especially fungal cultures |
|
Culture Media |
Media Quality Control – Growth Promoting and Inhibitory Properties |
1,600.00 |
The US Pharmacopeia 30 NF 25, 2007 |
-6 Plates / Test tubes of prepared media Test is not available for all types of media |
