| No. | SERVICE NAME | SAMPLE REQUIREMENTS | REQUIRED FEES, Php | |
| Client | Student | |||
| A.1 | Use of Compression Molding machine | Sample/s to be processed (1-8kg.) | 1,049.00 | 839.00 |
| A.2 | Use of Grinder | Sample/s to be processed (3-10kg.) | 610.00 | 488.00 |
| A.3 | Use of Twin Screw Extruder | Sample/s to be processed (1-10kg.) | 4,137.00 | 3,310.00 |
| A.4 | Use of Two Roll Mill and Compression Machine | Sample/s to be processed (1-8kg.) | 2,227.00 | 1,782.00 |
| A.5 | Firing Using 5kW Kiln (Firing Temperature: 8000C-10000C) | Sample/s to be tested (powder-maximum of 1kg., solid- maximum of 2pcs. bricks with size 6cm x 12cm x 24cm (L x W x H)) | 1,018.00 | 814.00 |
| A.6 | Pot milling of Mineral Powder, 500g – 1kg capacity (24 hours) | Sample/s to be processed (500-1000 grams) | 1,844.00 | 1,476.00 |
| B.1 | Determination of water absorption for ceramics | Sample/s to be tested (3 samples) | 1,037.00 | 830.00 |
| B.2 | Elemental Analysis by X-ray Fluorescence / Wavelength Dispersive (WD-XRF): One sample | Sample/s to be tested (1 sample, at least 10 gm) | 4,685.00 | 3,748.00 |
| B.3 | Particle Size Analysis by Dynamic Light Scattering: One sample | Sample/s to be tested (at least 3 grams powder samples, dispersing medium, Refractive Index (RI) of the powder and RI of dispersing medium) | 2,611.00 | 2,089.00 |
| B.4 | Specular Gloss Measurement | Sample/s to be tested (3 replicates of test panels, minimum size of 50mm x 100mm) | 536.00 | 428.00 |
| B.5 | X-ray Diffraction Analysis (raw data -ASCII file) | Sample/s to be tested (at least 10 grams powder) | 4,480.00 | 3,583.00 |
| B.6 | Surface Roughness by Imaging with measurement by Atomic Force Microscope (AFM) | Sample/s to be tested (1 flat sample, maximum diameter of 18mm, maximum height of 8mm) | 4,338.00 | 3,471.00 |
| B.7 |
TEM Imaging and Diffraction (4 images and 4 SEAD images /sample or 4 images and 2 NBD images/sample) |
Sample/s to be tested (at least 1gram powder/colloidal solution) | 16,169.00 | 12,936.00 |
| B.8 |
TEM Imaging (Bright and Dark Field) (4 images/ sample |
Sample/s to be tested (at least 1 gram of powder/colloidal solution) | 11,925.00 | 9.540.00 |
| B.9 |
TEM Imaging EDS Analysis (4 images and 4 points analysis /sample |
Sample/s to be tested (at least 1 gram powder/colloidal solution) | 16,169.00 | 12,936.00 |
| B.10 |
TEM Imaging, Diffraction and EDS (4 images and 4 SEAD images /sample or 4 images and 2 NBD images/sample) |
Sample/s to be tested (at least 1 gram powder/colloidal solution) | 17,043.00 | 13,635.00 |
| B.11 | X-ray Diffraction Analysis(no soft copy): one sample | Sample/s to be tested (at least 10 grams powder) | 4,480.00 | 3,583.00 |
| C.1 |
Preliminary Evaluation of One Red Clay Sample (one month) |
Sample/s to be tested (10kg) | 7,615.00 | 6,092.00 |
2. Materials Development(Matdev) Laboratory
| No. | SERVICE NAME | SAMPLE REQUIREMENTS | REQUIRED FEES, Php | |
| Client | Student | |||
| A.1 | Composite FDM 3D Printing using Markforged Marktwo (Material: Pure Onyx) |
Sample/s to be processed: - STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 320 mm × 132 mm × 154 mm (L × W × H) |
2135.00 | 1707.00 |
| A.2 | Composite FDM 3D Printing using Markforged Marktwo (Material: Onyx w/ continuous Carbon fiber) |
Sample/s to be processed: -.STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 320 mm × 132 mm × 154 mm (L × W × H) |
7538.00 | 6030.00 |
| A.3 | Composite FDM 3D Printing using Markforged Marktwo (Material: Onyx w/ continuous Fiber glass) |
Sample/s to be processed: - .STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 320 mm × 132 mm × 154 mm (L × W × H) |
4800.00 | 3839.00 |
| A.4 | Composite FDM 3D Printing using Markforged Marktwo (Material: Onyx w/ continuous Kevlar) |
Sample/s to be processed: - .STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 320 mm × 132 mm × 154 mm (L × W × H) |
5487.00 | 4389.00 |
| A.5 | Composite FDM 3D Printing using Markforged Marktwo (Material: Onyx w/ continuous HSHT Glass) |
Sample/s to be processed: - .STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 320 mm × 132 mm × 154 mm (L × W × H) |
5487.00 | 4389.00 |
| A.6 | FDM 3D Printing using Ultimaker S5 |
Sample/s to be processed: - .STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 330 mm × 240 mm × 300 mm (L × W × H) |
1963.00 | 1570.00 |
| A.7 | High Temp. FDM 3D Printing using Intamsys Funmat Pro 410 (Material: PEKK) |
Sample/s to be processed: - .STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 305 mm × 305 mm × 406 mm (L × W × H) |
5150.00 | 4120.00 |
| A.8 | High Temp. FDM 3D Printing using Intamsys Funmat Pro 410 (Material: PEI) |
Sample/s to be processed: - .STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 305 mm × 305 mm × 406 mm (L × W × H) |
4067.00 | 3253.00 |
| A.9 | High Temp. FDM 3D Printing using Intamsys Funmat Pro 410 (Material: PEEK) |
Sample/s to be processed: - .STL file of the sample to be printed - Printable within 8 hours using the parameters set by the client - Design must be printable within 305 mm × 305 mm × 406 mm (L × W × H) |
5036.00 | 4028.00 |
| A.10 | SLA 3D Printing using FORMLABS FORM 2 (Ceramic) |
Sample/s to be processed: - .STL file of the sample to be printed - Design printing time allowable within 8 hours - Design must be printable within 145 mm × 145 mm × 175 mm (L × W × H) |
2964.00 | 2371.00 |
| A.11 | SLA 3D Printing using FORMLABS FORM 2 (Resin Type: Standard Resin) |
Sample/s to be processed: - .STL file of the sample to be printed - Design printing time allowable within 8 hours - Design must be printable within 145 mm × 145 mm × 175 mm (L × W × H) |
3694.00 | 2955.00 |
| A.12 | SLA 3D Printing using FORMLABS FORM 2 (Resin Type: Tough Resin) |
Sample/s to be processed: - .STL file of the sample to be printed - Design printing time allowable within 8 hours - Design must be printable within 145 mm × 145 mm × 175 mm (L × W × H) |
5024.00 | 4018.00 |
| A.13 | SLA 3D Printing using FORMLABS FORM 2 (Resin Type: High Temp. Resin) |
Sample/s to be processed: - .STL file of the sample to be printed - Design printing time allowable within 8 hours - Design must be printable within 145 mm × 145 mm × 175 mm (L × W × H) |
5595.00 | 4475.00 |
| A.14 | SLA 3D Printing using FORMLABS FORM 2 (Resin Type: Dental SG Resin) |
Sample/s to be processed: - .STL file of the sample to be printed - Design printing time allowable within 8 hours - Design must be printable within 145 mm × 145 mm × 175 mm (L × W × H) |
7308.00 | 5847.00 |
| A.15 | SLA 3D Printing using FORMLABS FORM 2 (Resin Type: Dental LT Resin) |
Sample/s to be processed: - .STL file of the sample to be printed - Design printing time allowable within 8 hours - Design must be printable within 145 mm × 145 mm × 175 mm (L × W × H) |
8451.00 | 6760.00 |
| B.1 | Artec Space Spider 3D Handheld Scanner (Small Size 5-10 cm) |
Sample/s to be processed: - Actual sample to be scanned - Dimensions (L, W, H) not smaller than 5 cm and not exceeding 10 cm - Sample must be opaque - Samples must be free from dust, rust, or any kind of debris |
1133.00 | 905.00 |
| B.2 | Artec Space Spider 3D Handheld Scanner (Medium Size 10-20 cm) |
Sample/s to be processed: - Actual sample to be scanned - Dimensions (L, W, H) not smaller than 10 cm and not exceeding 20 cm - Sample must be opaque - Samples must be free from dust, rust, or any kind of debris |
1628.00 | 1301.00 |
| B.3 | Artec Space Spider 3D Handheld Scanner (Large Size 20-30 cm) |
Sample/s to be processed: - Actual sample to be scanned - Dimensions (L, W, H) not smaller than 20 cm and not exceeding 30 cm - Sample must be opaque - Samples must be free from dust, rust, or any kind of debris |
3255.00 | 2604.00 |
| C.1 | 2D and 3D Optical Imaging using Keyence VHX-7000 | Sample/s to be tested (1 sample, maximum size of 30 mm × 30 mm) | 2617.00 | 2094.00 |
| C.2 | 2D and 3D Optical Imaging with Measurements using Keyence VHX-7000 | Sample/s to be tested (1 sample, maximum size of 30 mm × 30 mm) | 3278.00 | 2622.00 |
| C.3 | Dynamic Mechanical Analysis with Tg Determination using Hitachi DMA7100 w/ positive Temp. | Sample/s to be tested (Sample dimensions dependent on the material according to the manual and published studies) | 4012.00 | 3211.00 |
| C.4 | Dynamic Mechanical Analysis with Tg Determination using Hitachi DMA7100 w/ negative Temp. | Sample/s to be tested (Sample dimensions dependent on the material according to the manual and published studies) | 5564.00 | 4453.00 |
