MENU

NMD SCHEDULE OF FEES AND CHARGES

As of June 2020

 

Electricity Standards Section

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Conductivity Meter

0.1 µS (minimum)

845.00

Centrifuge

Up to 18,000 r/min

800.00

DC Voltage Standard (per voltage level)

1.018 V and 10 V

5,590.00

Decade Resistance Box (per dial)

0 Ω  to 100 MΩ

1,140.00

Double Bridge

Up to 100 MΩ

2,500.00

Earth Tester

Up to 100 MΩ

1,350.00

per succeeding range

400.00

Frequency Calibrator

Up to 225 MHz

2,700.00

Frequency Counter

10 MHz

1,550.00

GPS Receiver

1 pps

9,000.00

Ground Strap Tester / Checker

Up to 100 MΩ

800.00

Illuminance / Lux / Light Meter

(380 to 2000) lux

2,600.00

Insulation Tester

Up to 1000 V

1,050.00

per succeeding range

350.00

Kelvin Bridge

Up to 100 MΩ

2,500.00

mA Calibrator

Up to 1000 mA

1,890.00

Megohmmeter / Megger Tester

Up to 1000 V

1,090.00

per succeeding range

350.00

Multimeter, Digital

4 ½ digits; Up to 1000 Vdc; Up to 650 Vac; Up to 1 A AC/DC; Up to 100 MΩ

2,500.00

6 ½ digits; Up to 1000 Vdc; Up to 650 Vac; Up to 1 A AC/DC; Up to 100 MΩ

17,000.00

pH Meter

0 to 14 pH

845.00

pH Simulator

0 to 14 pH

845.00

Process Calibrator (input/output)

Up to 1000 Vdc; Up to 650 Vac; Up to 1 A AC/DC; Up to 100 MΩ

4,900.00

Puncture Tester

Up to 5 kV AC/DC;

Up to 1 A AC/DC;

Up to 100 MΩ

1,700.00

Resistance Bridge / Wheatstone Bridge

1 Ω to 10 MΩ

1,700.00

Stopwatch / Timer

15 Minutes (minimum)

800.00

Standard Resistor (by Ratio)

1 Ω to 1 MΩ

6,500.00

Stroboscope

Up to 99,000 r/min

800.00

Tachometer (non-contact type)

Up to 18,000 r/min

800.00

Time Mark Generator

Up to 225 MHz

2,450.00

 

 

Pressure and Force Standards Section

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Absolute Pressure Calibrator

0.1 MPa to 100 MPa

6,110.00

Absolute Pressure Industrial Gauge

0.1 MPa to 100 MPa

975.00

Absolute Pressure Test Gauge

0.1 MPa to 100 MPa

3,055.00

Hydraulic Pressure Balance / Deadweight Tester

0.1 MPa to 100 MPa

20,150.00

Hydraulic Pressure Calibrator

0.1 MPa to 100 MPa

6,110.00

Hydraulic Pressure Gauge

0.1 MPa to 100 MPa

975.00

Hydraulic Pressure Test Gauge

0.1 MPa to 100 MPa

3,055.00

Pneumatic Pressure Balance

0 bar to 40 bar

20,150.00

Deadweight Pressure Tester

0 bar to 40 bar

20,150.00

Pneumatic Pressure Calibrator

0 bar to 200 bar

6,110.00

Pneumatic Pressure Gauge

0 bar to 20 bar

975.00

Pneumatic Pressure Test Gauge

0 bar to 20 bar

3,055.00

Testing of Sphygmomanometer

0 mmHg to 250 mmHg

1,300.00

Vacuum Calibrator

0 bar to -1 bar

6,200.00

Vacuum Gauge

0 bar to -1 bar

975.00

Vacuum Test Gauge

0 bar to -1 bar

3,055.00

 

Force

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Testing Machines

Up to 2000 kN

(5 test pts. per range)

3,700.00

per additional test point

750.00

Durometer A

0 HA to 90 HA

780.00

Durometer D

0 HD to 90 HD

1,560.00


 

Length Standards Section

Type of Equipment / Device

Range or Capacity

Calibration Fee per Piece (PHP)

Gauge Block Grade 0 (Steel)

0.5 mm to 100 mm

1,160.00

Gauge Block Grade 1 (Steel)

1,030.00

Gauge Block Grade 2 (Steel)

1,030.00

 

 

Thermometry and Hygrometry Standards Section

 

Contact Thermometry

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Digital Thermometer

-30 °C to +250 °C (first 4 cal. points)

2,180.00

per additional cal. point

650.00

per additional probe

1,090.00

Industrial Platinum Resistance Thermometer

-30 °C to +250 °C (first 6 cal. points)

11,700.00

per additional cal. point

975.00

Liquid-in-Glass Thermometer

-30 °C to +250 °C (first 4 cal. points)

2,180.00

per additional cal. point

650.00

(Wall / Refrigerator / Bimetallic) Thermometer

-30 °C to +250 °C (first 4 cal. points)

1,820.00

per additional cal. point

650.00

Thermocouple with Indicator

300 °C to 1000 °C

(per cal. point)

2,150.00

 

Non-Contact Thermometry

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Infrared Thermometer

Low-range:

(0, 35, 50, 100, 120) °C

2,800.00

High-range:

(0, 100, 200, 350, 500) °C

2,800.00

­

 

Enclosures

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Furnace

300 °C to 1000 °C (first cal. point)

2,730.00

per additional cal. point

1,400.00

Oven / Freezer / Incubator / Cold Storage / Walk-in Enclosures / Water Bath / Refrigerator, etc.

-30 °C to +250 °C (first cal. point)

2,730.00

per additional cal. point

1,400.00

 

Hygrometry

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Thermo-hygrometer

(20, 25, 30) °C;

(40, 60 and 80) %rh at 23 °C

1,274.00

Thermo-hygrograph

(20, 25, 30) °C;

(40, 60 and 80) %rh at 23 °C

3,822.00

 

Moisture

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Remarks

Wood Moisture Meter

9 % to 21 %

840.00

Test

Rice / Grain Moisture Meter

9 % to 21 %

2,500.00

Calibration;

5 samples of varying moisture content

Rice / Grain Moisture Meter

9 % to 21 %

1,800.00

Test;

1 sample

 

Volume and Flow Standards Section

 

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Burette

0.1 mL to 100 mL

(5 cal. points)

689.00

Volumetric Flask

1 mL to 5000 mL

689.00

Multiple Delivery Dispenser

1 µL to 100000 µL

(5 cal. points)

1,900.00

Piston Pipette

1 µL to 10000 µL

(3 cal. points)

1,900.00

per addition cal. point

630.00

Pipette

0.1 mL to 100 mL

689.00

Proving Tanks (Gravimetric)

up to 500 L

5,200.00

Proving Tanks (Volumetric)

100L to 400L

3,500.00

Proving Tanks (Volumetric)

>400L to 2000 L

3,500.00

Proving Tanks (Volumetric)

>2000 L to 5000 L

4,500.00

Road Tankers (Volume capacity determination)

 

up to 10000 L

920.00

>10000 L to 15000 L

1,370.00

>15000 L to 20000 L

1,840.00

>20000 L to 25000 L

2,300.00

>25000 L to 30000 L

2,750.00

>30000 L to 35000 L

3,200.00

>35000 L to 40000 L

3,650.00

>40000 L to 45000 L

4,100.00

>45000 L to 50000 L

4,200.00

Test Measure (Gravimetric)

5 L , 10 L , 20 L

2,340.00

Test Measure (Volumetric)

5 L , 10 L

390.00

Test Measure (Volumetric)

20 L

780.00

 

Density

Type of Equipment / Device

Range or Capacity

Calibration Fee (PHP)

Hydrometers

(600 to 2000) kg/m³

1,200.00

 

Mass Standards Section

 Calibration of Weights

Class / Type

Range

Calibration Fee per Piece (PHP)

Remarks

OIML Class E2

1 mg to 50 g

1,090.00

DAkkS Certificate

(1 mg to 1 kg only)

 

NML Certificate

(2 kg to 50 kg)

100 g to 500 g

1,480.00

1 kg to 10 kg

1,660.00

20 kg to 50 kg

1,990.00

OIML Class F1 / F2

1 mg to 50 g

600.00

DAkkS Certificate

(1 mg to 50 kg only)

 

NML Certificate

(100 kg to 200 kg)

100 g to 500 g

650.00

1 kg to 10 kg

950.00

20 kg to 50 kg

1,050.00

100 kg to 200 kg

2,100.00

OIML Class M1 / M2 / M3

1 mg to 500 g

450.00

DAkkS Certificate

(1 mg to 50 kg only)

 

NML Certificate

(100 kg to 200 kg)

1 kg to 10 kg

600.00

20 kg to 50 kg

700.00

100 kg to 200 kg

1,500.00

500 kg

2,100.00

Free Nominal (Stainless Steel)

1 mg to 50 g

600.00

DAkkS Certificate

(1 mg to 50 kg only)

 

NML Certificate

(100 kg to 200 kg)

> 50 g to 500 g

650.00

> 500 g to 10 kg

950.00

> 10 kg to 50 kg

1,050.00

> 50 kg to 200 kg

2,100.00

Free Nominal (Other Materials)

1 mg to 500 g

450.00

DAkkS Certificate

(1 mg to 50 kg only)

 

NML Certificate

(100 kg to 500 kg)

> 500 g to 10 kg

600.00

> 10 kg to 50 kg

700.00

> 50 kg to 200 kg

1,500.00

> 200 kg to 500 kg

2,100.00

 

Calibration / Testing of Nonautomatic Weighing Instruments (NAWI)

Type of Service

Range / Accuracy Class

Calibration Fee per Piece (PHP)

Remarks

Calibration of NAWI, electronic type only

(on-site calibration)

Up to 2 kg

(using OIML Class E2)

2,000.00

DAkkS Certificate

(up to 600 g only)

NMD Certificate

(>600 g up to 2 kg)

Up to 60 kg

(using OIML Class F1)

1,530.00

DAkkS Certificate

(up to 20 kg only)

NMD Certificate

(>20 kg up to 60 kg)

Up to 200 kg

(using OIML Class F2)

1,530.00

DAkkS Certificate

(up to 60 kg only)

NMD Certificate

(>60 kg up to 200 kg)

Up to 300 kg

(using OIML Class M1)

1,530.00

NMD Certificate

Testing of NAWI, electronic and mechanical types

High Accuracy*

(using OIML Class F2;

1 tonne)

1,200.00

NMD Certificate

Medium Accuracy*

& Ordinary Accuracy*

(using OIML Class M1 and substitution material; 1 tonne)

1,080.00

*per additional tonne

20.00

 

 

On-Site Calibration Service

Additional Daily Surcharge Fee per NMD personnel

PHP 1,500.00